What color is the PEEK rod?
2021-06-25
There are two types of PEEK rods: modified and pure PEEK. The Chinese name is polyetheretherketone pipe. PEEK rod not only has better heat resistance than other high temperature resistant plastics, but also has high strength, high modulus, high fracture toughness and excellent dimensional stability.PEEK rods made of high-performance PEEK materials are widely used in various industries, especially the oil and gas industry and the semiconductor industry. Due to the comprehensive requirements of temperature, chemical resistance, creep resistance, thermal stability and compression resistance, PEEK is often the material of choice. At present, there are mainly three colors of PEEK rods developed on the market. These three colors are also the colors of PEEK rods that we often see.
2, the second type of PEEK-C1030 rod (black)
The material is filled with 30% carbon fiber reinforcement, has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance, and the carbon fiber reinforced plastic has 3.5 times higher than the unreinforced PEEK plastic Thermal conductivity-faster heat dissipation from the bearing surface.
Third, the third type of PEEK-G1030 rod (brown gray)
This material is filled with 30% glass fiber reinforced plastic, which has better rigidity and creep resistance than PEEK-1000, and better dimensional stability, making it ideal for manufacturing structural parts. It can bear a fixed load for a long time under high temperature.
1, the first PEEK-1000 rod (natural color)
PEEK-1000 is made of pure polyether ether ketone resin, which has the best toughness and impact resistance among all PEEK grades. PEEK-1000 can be disinfected by the most convenient disinfection method (steam, dry heat, ethanol and Y-ray), and the raw material composition of PEEK-1000 complies with EU and US FDA regulations on food rigidity. These characteristics make it suitable for medical treatment. , The pharmaceutical and food processing industries are widely used.2, the second type of PEEK-C1030 rod (black)
The material is filled with 30% carbon fiber reinforcement, has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance, and the carbon fiber reinforced plastic has 3.5 times higher than the unreinforced PEEK plastic Thermal conductivity-faster heat dissipation from the bearing surface.
Third, the third type of PEEK-G1030 rod (brown gray)
This material is filled with 30% glass fiber reinforced plastic, which has better rigidity and creep resistance than PEEK-1000, and better dimensional stability, making it ideal for manufacturing structural parts. It can bear a fixed load for a long time under high temperature.
